Jump to content

Recommended Posts

  • Members
Posted

I found a decent deal on a Holster and bought it, only to find out it had a masking tape "price tag" on the front! Ugh..... here is a picture of how it looks after I took the tape off.

Any good ideas what might help to clean this off and then what to do to restore it to a good looking piece of leather?

Thanks!

vnmhd0.jpg

Posted

I use a gum eraser and it works quite well.....but caution, do not rub too hard or you will disburb the finish. You can try a bit of Goo-Gone, that should work without disturbing the finish.

Good luck.

  • 2 weeks later...
  • Members
Posted

I found some stuff called Elmer's Sticky Out at Office Max. Takes off masking & clear tape residue quite well from wood surface. I would definitely try it on the backside first to make sure it doesn't eat the finish. Also I've had some sucess with WD 40.

Posted

Fabric softner works pretty good to. Just get a little on your finger and rub lightly. But like one of the poster said try it on the back first.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...