hacken94 Report post Posted November 28, 2010 If somebody could tell me what stamp he uses that would be great. Quote Share this post Link to post Share on other sites
TwinOaks Report post Posted November 28, 2010 I don't see anything that say's "stamp" to me. There are some spots at the top of the photo that look a lot like a diamond shaped shader, but in the outlined area, the lines are pretty continuous. It may have started out with a stamp of some sort, but most likely, that was created with modeling tools, perhaps a stylus. There's also the possibility it was done with a piece of wood to get the grain lines, or possibly stamped with wood and followed with a modeling tool. Third possibility is it's a homemade stamp, completely custom.....there are a few of us here that dabble in tool creation to have our own unique designs. Quote Share this post Link to post Share on other sites
Stewart Report post Posted November 28, 2010 (edited) How about a steel or wood chisel. I used a small flat headed screwdriver to do the groves on engine piston i am doing for a belt. Stewart Edited November 28, 2010 by Stewart Quote Share this post Link to post Share on other sites
