Members Syd Posted February 24, 2011 Members Report Posted February 24, 2011 Hope someone can help with the following. Im make a large tool roll from very fine leather,i just cant get my head around how i stitch the leather together when they're sitting at two different angles,ive added a photo below,its the end of the roll i cant get my head around with the round end bit of leather and the side, how is this stitched together. New to machine stitching Helppppppppppppppppppppppppppppppppppp Syd Quote
dirtclod Posted February 24, 2011 Report Posted February 24, 2011 It looks like they folded the long part back on it's self before they sewed. I would have to glue it, if you have a guide on your machine you will need to use it if you don't it will be really hard to get a even stich line without and you probley get some puckers. It will have to be sewn wrong side out and then turned right side out. The pocket on the end was sewed on before anything i bet. Good luck. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.