Members Docado Posted March 1, 2011 Members Report Posted March 1, 2011 Tippmann 1500 Clicker is in like New Condition........For sale. $2400.... St. Louis, Mo. Area. May pick up of arrange shipping at your expense. Questions welcome. Thanks Kirk
Members kgreining Posted March 18, 2011 Members Report Posted March 18, 2011 Hi Kirk, Do you still have the Tippmann Clicker? Can you give me any more information about it please? Thanks, Kara
Members Docado Posted March 18, 2011 Author Members Report Posted March 18, 2011 Hi Kirk, Do you still have the Tippmann Clicker? Can you give me any more information about it please? Thanks, Kara Hello Kara, Yes I still have it....... It is for sale because I do not need two clickers and I need the space it occupies. 1 1/4 inch dies are recommended, but you may use 3/4 inch if you use 1/2 inch plastic cutting board for a spacer. If you go to Tippmann Web Site and bring up 1500 Clicker it will give all the specs. The address below ought bring it right up. http://tippmannclicker.com/index.php?main_page=product_info&products_id=185 Hope that answers your questions if not just holler........Thanks for your interest.....Kirk
Members kgreining Posted March 19, 2011 Members Report Posted March 19, 2011 Hello Kara, Yes I still have it....... It is for sale because I do not need two clickers and I need the space it occupies. 1 1/4 inch dies are recommended, but you may use 3/4 inch if you use 1/2 inch plastic cutting board for a spacer. If you go to Tippmann Web Site and bring up 1500 Clicker it will give all the specs. The address below ought bring it right up. http://tippmannclicker.com/index.php?main_page=product_info&products_id=185 Hope that answers your questions if not just holler........Thanks for your interest.....Kirk
Members kgreining Posted March 19, 2011 Members Report Posted March 19, 2011 Hi Kirk, Just a few more questions. How old is it? What type of work has it been used for? What, if anything is included with it? Stand? Air accumulator? What is the condition of the cutting bed? I am ready to purchace one and was going to go with a new one. Thanks, Kara kgreining@aol.com
Members Docado Posted March 19, 2011 Author Members Report Posted March 19, 2011 Hi Kirk, Just a few more questions. How old is it? What type of work has it been used for? What, if anything is included with it? Stand? Air accumulator? What is the condition of the cutting bed? I am ready to purchace one and was going to go with a new one. Thanks, Kara kgreining@aol.com Hello Kara, I have had it about 2 years. I used it to cut leather items,spur straps, bridles, key fobes and such. Nothing is included. Cutting bed is in very good shape. You are more than welcome to come and try it. If I was looking to get one, I would hope that I could find one in as good a shape as this is. My preference is used over new account of the cost savings... Will try to get some pic's if interested. Thanks for your consideration Kirk
Members kgreining Posted March 19, 2011 Members Report Posted March 19, 2011 Hello Kara, I have had it about 2 years. I used it to cut leather items,spur straps, bridles, key fobes and such. Nothing is included. Cutting bed is in very good shape. You are more than welcome to come and try it. If I was looking to get one, I would hope that I could find one in as good a shape as this is. My preference is used over new account of the cost savings... Will try to get some pic's if interested. Thanks for your consideration Kirk
Members kgreining Posted March 19, 2011 Members Report Posted March 19, 2011 Hi KIrk. I am very interested. I am 5 or 6 hours away from STL. Can you contact me by email? kgreining@aol.com Not really sure how to work it out as far as seeing it and if I buy it picking it up. I will be doing the same type of work with it as you. Maybe you can guide me where to get dies made etc. Thanks, Kara
Members BeastMaster Rodeo Posted April 14, 2011 Members Report Posted April 14, 2011 Did you sell your clicker
Members Docado Posted April 19, 2011 Author Members Report Posted April 19, 2011 Did you sell your clicker I still have it. Let me know if there is something that I can answer for you. Thanks Kirk
Recommended Posts