Members JJMAC Posted March 7, 2011 Members Report Posted March 7, 2011 (edited) Still trying to figure out how to finish the holster, but I like the rugged look... Edited March 7, 2011 by JJMAC Quote
Members JJMAC Posted March 7, 2011 Author Members Report Posted March 7, 2011 Also, Any advise on snaps? I could barely get these snaps to clear the leather... i would like to use some sort of removable snap for different belt sizes... Quote
Members Rayban Posted March 7, 2011 Members Report Posted March 7, 2011 Also, Any advise on snaps? I could barely get these snaps to clear the leather... i would like to use some sort of removable snap for different belt sizes... Sandwich a "t nut" between the two layers of leather, then screw the male part of the snap into the t-nut along with the bottom layer of strap. Follow? If not, I can send some pictures ......tomorrow.....shops closed for the night:-) Quote
Members JJMAC Posted March 7, 2011 Author Members Report Posted March 7, 2011 Not sure that I do. Thanks for the pics when you get a chance! Quote
Members Rayban Posted March 7, 2011 Members Report Posted March 7, 2011 Here ya go: T-nuts, size 6-32 x 1/4" Here it is poking through the front layer of holster: Insert Screw (6-32 x 3/8") through male of snap, and through btm layer of strap: Screw into t-nut, finish off strap: Hope this is clear..... Quote
Members Shooter McGavin Posted March 7, 2011 Members Report Posted March 7, 2011 Thats pretty much what I do as well, except I use the T-nuts with the teeth, and I put in a small leather "washer" between the holster and the straps, to compensate for the thickness of the pants. Quote
Members Rayban Posted March 7, 2011 Members Report Posted March 7, 2011 (edited) BTW...I learned that right here, from our very own:grouphug5vj5: Good idea Shooter...I'll have to steal that from ya too. Edited March 7, 2011 by Rayban Quote
Members woodandsteel Posted March 8, 2011 Members Report Posted March 8, 2011 That's the way I've been doing it, too. I figured that attachment method out on my own, so I'm glad to see I'm doing it right! For an adjustable position strap, I'll use an 8-32 screw with the back of a chicago screw, so you can use different holes. Like this: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.