LBsaddles Report post Posted March 21, 2011 Just finished this Wade for a customer. i was sure how it would look since its not tooled much but it turned out nicer than i expected. Quote Share this post Link to post Share on other sites
dirtclod Report post Posted March 21, 2011 How does your customer like the saddle ? Got anymore pictures ? Quote Share this post Link to post Share on other sites
LBsaddles Report post Posted March 21, 2011 The customer really likes it If you can see the horn in this picture i filled under it so the leather looks like a horn cap concho but its all leather Quote Share this post Link to post Share on other sites
LBsaddles Report post Posted March 21, 2011 Heres one more picture Quote Share this post Link to post Share on other sites
ct701996 Report post Posted March 21, 2011 (edited) it looks nice, there are just a couple things you could have done different, on the back jockeys it looks a little nicer if they are a little shorter than the skirts, , then on the fenders take the bottom of the fender all the way down through the stirrup back to the blevins buckles, then when you cut your ear on the seat cut it out higher out of the seat leather, you will have to put a plug in it but it will be covered by the binding, all in all it looks good, please dont take offense to the comment, im not that experinced myself but i know from experince i can see other peoples mistakes better than my own Edited March 21, 2011 by ct701996 Quote Share this post Link to post Share on other sites
steve mason Report post Posted March 21, 2011 I hope the customer ropes left handed, cause if he is not, he better be stronger that the critter he ropes or that hornwrap will come undone. Quote Share this post Link to post Share on other sites
