shakygreg Report post Posted March 28, 2011 (edited) I am about to buy a very used honda 185s and I might re-upholster the seat. Can someone please tell me how to go about doing this. Thanks in advance. Edited March 28, 2011 by shakygreg Quote Share this post Link to post Share on other sites
TinyL Report post Posted March 30, 2011 It's hard to see in the picture Shaky, but the foam looks very deteriorated. That aside, it depends how you want to cover it and with what. What kind of leather do you want to cover it with? Do you want to reupholster it or cover with veg tan? Chris Quote Share this post Link to post Share on other sites
Randy Cornelius Report post Posted March 31, 2011 The picture just don't help answer your question. If you can take the seat off and show the underside it would help. But if it is just stapled on you can cover and stretch the leather and re-staple it. Without the old cover to take apart and use as a pattern you are just winging it. You could lay out some paper and make a pattern of the top, sides and the front and back and figure where to sew it together at. I would go for this method as you would have a better luck getting it to fit. Use an electic or power stapler to put it back on with. start in the middle and pull it tight as you staple, work out any puckers as you go. This is just general info like I said the picture don't help much with design. RC Quote Share this post Link to post Share on other sites
shakygreg Report post Posted April 1, 2011 Thanks for the replies guys. I really appreciate it. I will post some more up-close pics soon to see if I can squeeze ot any more help from yall. Thanks in advance. Quote Share this post Link to post Share on other sites
