Members seweng Posted September 13, 2011 Members Report Posted September 13, 2011 If you’re convinced it should work on your job, then why don’t you get somebody to set it up correctly. There are many suppliers in Europe who sell Durkopp Adler machines. Quote
Members adler205 Posted September 13, 2011 Author Members Report Posted September 13, 2011 Last week I had a sewing machine engineer at my cost work on the machine, we never managed to get anywhere near the sample that Weaver Leather sent me which was done on the same machine, also the machine still misses stitches. If you're convinced it should work on your job, then why don't you get somebody to set it up correctly. There are many suppliers in Europe who sell Durkopp Adler machines. Quote
Moderator Wizcrafts Posted September 14, 2011 Moderator Report Posted September 14, 2011 Last week I had a sewing machine engineer at my cost work on the machine, we never managed to get anywhere near the sample that Weaver Leather sent me which was done on the same machine, also the machine still misses stitches. What size (number) are the thread, needle and spacer shim in use, when the machine skips stitches? What type of point is on the needle (round, or diamond, or triangle, or LR)? What thickness are you trying to sew, when it is skipping? What thickness of leather will it sew without skipping? Is the leather soft, medium or hard temper? Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Trox Posted September 15, 2011 Report Posted September 15, 2011 I have a sample of leather Weaver company sent me, it was done on the Adler 205-370 machine using the harness foot, it measures 21mm thick and they told me I'll have no problems doing 20mm. You see where I'm coming from now ? I hear all kinds of things about the Adler 205-370, some say it can do 20mm all day and some say you will have problems. I guess I have to buy one, use it untill it brakes, fix it then use it untill it brakes again and keep going. I wonder what machine who will sew more than its max foot lift? Dürkopp Adler 205-370 foot lift by hand 15 mm, by foot 19 mm. It has to move the material true to make more than one stitch too. I guess that Weaver sample was done on a Union lockstitch. Not on a stock 205- 370, thats not possible. 15 to 16 mm maximum is more realistic, but why dont you ask the members who has one, a salesman will tell you everything you want hear. You know what I do, I read the manual from Dürkopp Adler, you only have to read the leaflet to see that sewing 21 mm is impossible, no matter what kind of sewing foot, jet motor, turbo reducer etc.. It is a needle breaking NO GO Trox trox Quote Tor Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100
Members oldtimer Posted September 15, 2011 Members Report Posted September 15, 2011 I wonder what machine who will sew more than its max foot lift? Dürkopp Adler 205-370 foot lift by hand 15 mm, by foot 19 mm. It has to move the material true to make more than one stitch too. I guess that Weaver sample was done on a Union lockstitch. Not on a stock 205- 370, thats not possible. 15 to 16 mm maximum is more realistic, but why dont you ask the members who has one, a salesman will tell you everything you want hear. You know what I do, I read the manual from Dürkopp Adler, you only have to read the leaflet to see that sewing 21 mm is impossible, no matter what kind of sewing foot, jet motor, turbo reducer etc.. It is a needle breaking NO GO Trox trox I have an 205-374, and , like you say Trox, it is not possible to sew 20-21 mm thick material in it, as the lift doesn´t allow such thick material. It is not possible ! Quote "The gun fight at the O.K. corral was actually started by two saddlemakers sitting around a bottle of whiskey talking about saddle fitting"...
Members adler205 Posted September 15, 2011 Author Members Report Posted September 15, 2011 I will get back to you on all these questions, many thanks for the help. What size (number) are the thread, needle and spacer shim in use, when the machine skips stitches? What type of point is on the needle (round, or diamond, or triangle, or LR)? What thickness are you trying to sew, when it is skipping? What thickness of leather will it sew without skipping? Is the leather soft, medium or hard temper? Quote
Members adler205 Posted October 12, 2011 Author Members Report Posted October 12, 2011 Here is all the info I have to give you, After the engineer looked at the machine and did a bunch ofthings it could stitch about 1/2" thick (medium hard) leather, it wasstill skipping stitches every now and then. Then I looked at it and afterplaying with the 'needle bar position' and changing the thread to 'TEX550 Braided polyester' and finally changing the needle to Schmetz 794 S 280 size I can now stitch up to about 15mmthick medium hard leather, any thicker it will skip stitches. I use soft and medium leather (not hard leather) The machine is well capable and has the power with theDC1550 efka and speed reducer to punch the holes but it will skip stitches. Hasit reached its limits at 15mm ? regards What size (number) are the thread, needle and spacer shim in use, when the machine skips stitches? What type of point is on the needle (round, or diamond, or triangle, or LR)? What thickness are you trying to sew, when it is skipping? What thickness of leather will it sew without skipping? Is the leather soft, medium or hard temper? Quote
Moderator Wizcrafts Posted October 12, 2011 Moderator Report Posted October 12, 2011 I would say that your particular machine has reached its capacity, at 15 mm, with that thread and needle combination. I sent you a PM with some detailed things to do to verify that the timing is set to the best position. Note, that the timing changes as the stitch length changes. If the machine is set to sew perfectly at 6 stitches per inch and you move the lever down to sew 4 to the inch, the timing may be out. This gets even more critical in reverse. Let me convert math... 6 spi = ~4+ mm stitches. 4 spi =~6+ mm stitches. Maybe there is too much wear in the combined feed mechanism? Is the needle bar tight? Is the feed dog tight? Is the inside foot coming down at the right moment to hold the leather in place just as the needle beings to penetrate it? Does the inner foot move exactly in concert with the needle and feed dog? Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members adler205 Posted October 12, 2011 Author Members Report Posted October 12, 2011 I have looked at the tightness of the feed dog, although I can not make it any tighter but there is a little movement there. I hear you on the 'reverse', Just so you know the other day I had a sample of 22mm of the hardest sole leather stitched together (4 layers), reliably, it was stitched on a BLAKE DN76 machine, that's the kind of machine I should have bought. take care I would say that your particular machine has reached its capacity, at 15 mm, with that thread and needle combination. I sent you a PM with some detailed things to do to verify that the timing is set to the best position. Note, that the timing changes as the stitch length changes. If the machine is set to sew perfectly at 6 stitches per inch and you move the lever down to sew 4 to the inch, the timing may be out. This gets even more critical in reverse. Let me convert math... 6 spi = ~4+ mm stitches. 4 spi =~6+ mm stitches. Maybe there is too much wear in the combined feed mechanism? Is the needle bar tight? Is the feed dog tight? Is the inside foot coming down at the right moment to hold the leather in place just as the needle beings to penetrate it? Does the inner foot move exactly in concert with the needle and feed dog? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.