Phatdaddy Report post Posted June 26, 2011 (edited) This is my first attemp on some scrap. I was intimidated by this braid but found it wasn't as bad as it looks. Below is my first attempt, I was wondering if the gaps were supposed to be like that or if I need a different spacing thonging chisel or maybe different sized lace. Chisel is 4prong 1/8 with 1/8 lace. Also how snug should you pull the lacing Edited June 26, 2011 by Phatdaddy Quote Share this post Link to post Share on other sites
electrathon Report post Posted June 26, 2011 No, the gaps are not "supposed" to be there. Move your spaces closer togeather or use wider lace to fix it. Aaron Quote Share this post Link to post Share on other sites
hidepounder Report post Posted June 26, 2011 No, the gaps are not "supposed" to be there. Move your spaces closer togeather or use wider lace to fix it. Aaron I agree! Quote Share this post Link to post Share on other sites
Phatdaddy Report post Posted June 26, 2011 I thought the lace was 1/8 turns out to actually be 3/32 - thanks guys. I'll get a smaller chisel. Quote Share this post Link to post Share on other sites
