Members Happy Hooligan Posted July 1, 2011 Members Report Posted July 1, 2011 Hey guys, I just finished this stitching pony this week as I felt I needed one. It's my own design for the most part, recycled oak... I'll give it a go this weekend. I thought a taller one would be easier to see than the lower ones tandy makes. What do you think? I've never used one, so if you see any possible flaws let me know.... I have more pics on my blog Quote
dirtclod Posted July 1, 2011 Report Posted July 1, 2011 Looks good to me. But i think the board on the bottom should be going the other way. The way it is now your only going to be able to put one foot bottom to hold it still. The way it is now if you set in a chair with the wing nut facing you, you have to reach over the top of what ever your sewing to get the needle through your work. But you may sew a different way than me. Quote
Members Happy Hooligan Posted July 1, 2011 Author Members Report Posted July 1, 2011 ah... you may be right... again, I've never used one before so I'll see how this one is to work with. If it's too tall too, I can must move my side pieces down... I have room to work with... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.