Happy Hooligan Report post Posted July 1, 2011 Hey guys, I just finished this stitching pony this week as I felt I needed one. It's my own design for the most part, recycled oak... I'll give it a go this weekend. I thought a taller one would be easier to see than the lower ones tandy makes. What do you think? I've never used one, so if you see any possible flaws let me know.... I have more pics on my blog Quote Share this post Link to post Share on other sites
dirtclod Report post Posted July 1, 2011 Looks good to me. But i think the board on the bottom should be going the other way. The way it is now your only going to be able to put one foot bottom to hold it still. The way it is now if you set in a chair with the wing nut facing you, you have to reach over the top of what ever your sewing to get the needle through your work. But you may sew a different way than me. Quote Share this post Link to post Share on other sites
Happy Hooligan Report post Posted July 1, 2011 ah... you may be right... again, I've never used one before so I'll see how this one is to work with. If it's too tall too, I can must move my side pieces down... I have room to work with... Quote Share this post Link to post Share on other sites
