Members LeatherLori Posted July 20, 2011 Members Report Posted July 20, 2011 Do I have to angel the pattern? 9" wrist and 3" wide band is what I'm looking to make.... Quote
dirtclod Posted July 20, 2011 Report Posted July 20, 2011 I'm not real sure what your asking about. But if you want to make a 3" wrist band you will have to angle / taper it where the buckle and strap meet unless you use a 3' buckle or maybe two buckles and straps sewn onto the 3" piece. Quote
gringobill Posted July 20, 2011 Report Posted July 20, 2011 Another option is to use a couple of sets of snaps instead of buckles. If you can get a good measurement of the wrist that it's going on you might only need one set of snaps but if it gets too tight or loose that could be a problem. Bill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.