Members Warpe Posted July 31, 2011 Members Report Posted July 31, 2011 Just want to know what is a good size for a Maker's Mark? I will be using it on holsters and belts. Thanks Warpe Quote
Members Glendon Posted July 31, 2011 Members Report Posted July 31, 2011 It depends on the size of the items you're making. You wouldn't use the same stamp on a belt that you would on a saddle or a small belt makers mark on a saddle. That being said, if you're doing a lot of 1" belts then I would probably get a 3/4" stamp to start with. If you're doing 1-1/2" belts and your holsters have the space then a 1" stamp might be right for you. Quote
King's X Posted August 1, 2011 Report Posted August 1, 2011 I agree. I would not go anything larger than 3/4". I have a nice oval stamp that is within this limit for medium works. Good luck. Quote
Members Warpe Posted August 1, 2011 Author Members Report Posted August 1, 2011 Cool. Thanks for the input! Quote
Members JoelR Posted August 21, 2011 Members Report Posted August 21, 2011 I have a 1" and am now looking for 1/2" and some specialty stamps - "Horsehide", "Hand Stitched", etc... So, one size may not fit all. Quote
Members Hell Bent 4 Leather Posted January 2, 2012 Members Report Posted January 2, 2012 (edited) Where can I have a maker's mark made? Currently, I'm simply stamping two 'R's resembling the Rolls Royce logo, but with different lettering, somewhere on each piece I make to represent my nick name 'Road Rash'. I'd like one that's oval and says 'Hell Bent 4 Leather, Hand Made In CSA, Made By Road Rash'. That would be awesome! Edited January 2, 2012 by Hell Bent 4 Leather Quote
Members Hell Bent 4 Leather Posted January 2, 2012 Members Report Posted January 2, 2012 Found Grey Ghost! Disregard! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.