Members redhat4201 Posted September 11, 2011 Members Report Posted September 11, 2011 Pancake for a Les Baer 1911 Bad cell phone pic of this one. Threaded barrel 1911 IWB. Quote
wizard of tragacanth Posted September 11, 2011 Report Posted September 11, 2011 Mmmm, very nice. Quote
Members particle Posted September 12, 2011 Members Report Posted September 12, 2011 Looks great! Quote
Members Reaper Posted September 16, 2011 Members Report Posted September 16, 2011 Very nice, indeed. The only thing I might look at trying would be to have a little more leather on the back side of the Pancakes slots and also above the slots. Over time with use depending on the conditions the leather could wear and tear. Like when a belt wears out, adding just a little more would give it more time if it was to happen. They look very nice as they are, just thinking of long term usage and MTF (mean time failure)... Quote
Members katsass Posted September 16, 2011 Members Report Posted September 16, 2011 (edited) Very nice, indeed. The only thing I might look at trying would be to have a little more leather on the back side of the Pancakes slots and also above the slots. Over time with use depending on the conditions the leather could wear and tear. Like when a belt wears out, adding just a little more would give it more time if it was to happen. They look very nice as they are, just thinking of long term usage and MTF (mean time failure)... Reaper, I have to agree with you. To me, that is the weak spot in the pancake design, because that's where the most stretching and wear will take place. Ray at LOBO Gunleather designed the "Enhanced Pancake" which, in my mind, is a great improvement over the original. I'm too much of a 'traditionalist' to really like the pancake (or many of the newer designs) but since I build then now and then, I try to push the enhanced form if that type is requested. Mike Edited September 16, 2011 by katsass Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.