GaryK Report post Posted September 16, 2011 Hi Just got mine and got it unpack have not got it completely together yet but I am wondering if the EPS is a separate unit are part of the motor or am I off on all? and info sure would be appreciated just trying to find out before I call Steve tomorrow Thanks Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted September 16, 2011 (edited) EPS motors use a separate sensor module and connecting linkage that controls the up or down position of the needle bar, when the motor is stopped by your heel on the pedal. It feeds a box with the circuitry, which then connects to and controls the motor's off on function. If all you see is a servo motor and a speed reducer under the table and no module connected between the machine and the motor (other than belts), you are missing the EPS. Here is a picture of the Cobra EPS motor: http://www.leathermachineco.com/catalog.php?item=55 Edited September 16, 2011 by Wizcrafts Quote Share this post Link to post Share on other sites
GaryK Report post Posted September 17, 2011 Thanks Wizcrafts talked to Steve todaylooks like his guys might have made a mistake on labeling what machine went where but shit happens and I am sure he will fix the problem Steve is a really good guy again Thank You Gary Quote Share this post Link to post Share on other sites
