Members JoshDuvall Posted January 5, 2012 Members Report Posted January 5, 2012 I was wondering if anybody had a XDm 9mm magazine that they could give me the measurements off of? Quote
Members Abram Posted January 5, 2012 Members Report Posted January 5, 2012 I don't have them handy but I could get them for you tonight. Quote
Members JoshDuvall Posted January 5, 2012 Author Members Report Posted January 5, 2012 I don't have them handy but I could get them for you tonight. That would be perfect. Thank you Quote
Members bigR Posted January 6, 2012 Members Report Posted January 6, 2012 The 16 rd. mag. is 5 1/8 long loaded and the mag. tube is 3/4" x 1 1/4" and the base plate is 1 5/8" . 10 rd. mag. is 4 1/4" loaded. Note the newer XD 9's are using bigger mags. and they may be double stacked so would be worth your time to ck. a local gun shop to verify the dim. didn't change too much. Altho to be honest I put a Tandy kit mag. carrier together and both those mags. fit fine along with a 13 rd. 45 cal. mag. so the basic dim. will fit a lot of guns. If you are not using a retainer you may want to use a welt inside for tightness. Good luck. Quote
Members Abram Posted January 6, 2012 Members Report Posted January 6, 2012 Well bigR beat me to the punch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.