Jump to content

Recommended Posts

  • Members
Posted

Hi again Trox , I got a feed dog and the swing away guide to mount the binder . & of course you can have them if U want Send me the part numbers from the other stuff & I'll ask Callot for clone prices I also got a binder and it's for leather . It's included in the price 000,00€

Let me know .

Ralph

  • Replies 20
  • Created
  • Last Reply

Top Posters In This Topic

Posted

Hi Ralph and Sewingtec, My Internet line has been down because of an ISP change. It is hard to follow up these topics on an Iphone, but broadband line is up again now.

Thank you my good friend Ralph, but you must accept some payment for it. I do not have any experience with the binding operation, but I can see the necessity of a synchronized operation cause of the walking foot. Is it possible to connect your swing away bracket to the feed dog? If so the only thing I need more is the needle plate for the subclass -H3 17/01, # 91-040 701-04. This is a plate with a cut out for the synchronized binder bracket. If I can not find one, I can do as you did and modify a standard plate. The binder foot set has the number # 91-042 819-93 x 5, 0 and # 91-040 432-04 x 8. Or I can use a clone product. Thank you again Ralph, think of a price, if you have Paypal it is easy to send you money.

I have also received a PM from Coryleif, he informed me about a Hong Kong company; kwokhing.com. These are the prices of the binders he purchased from them:

KHF2 (S thickness) 26mm USD 12.30

KHF8 Single Fold 1" USD 8.40

KHF66 1" USD 12.30. I have not had time to contact them yet.

Thanks

Trox

Hi again Trox , I got a feed dog and the swing away guide to mount the binder . & of course you can have them if U want Send me the part numbers from the other stuff & I'll ask Callot for clone prices I also got a binder and it's for leather . It's included in the price 000,00€

Let me know .

Ralph

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

Posted

Hi Sewingtec,

Thanks, but it looks like I will get some help from my friend Ralph (Leather Guru). I also have some options to buy from a low price Hong Kong company kwokhing.com, If I can get in contact with them. But thanks for your help, you are doing a great job on sew24.com providing manuals and obsolute parts.

Thanks

Trox

Hi Trox,

for choseing a binder you must sure which material you sewing and which diameters you need.

you can use the standard but you need a special walking (like 91-049 269-93/006) and presser foot (like 91-040 432-04/005)

but you must know what you will sewing and which materials befor you chose a foot or something else.

the binderinstrument can be 91-045 543-90 but you don't find this in the shop this is to special.

the binderinstrument from pfaff will cost 210 €

if you have any questions you can ask me!

best regards

sewingtec

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

  • Members
Posted

Hi Ralph and Sewingtec, My Internet line has been down because of an ISP change. It is hard to follow up these topics on an Iphone, but broadband line is up again now.

Thank you my good friend Ralph, but you must accept some payment for it. I do not have any experience with the binding operation, but I can see the necessity of a synchronized operation cause of the walking foot. Is it possible to connect your swing away bracket to the feed dog? If so the only thing I need more is the needle plate for the subclass -H3 17/01, # 91-040 701-04. This is a plate with a cut out for the synchronized binder bracket. If I can not find one, I can do as you did and modify a standard plate. The binder foot set has the number # 91-042 819-93 x 5, 0 and # 91-040 432-04 x 8. Or I can use a clone product. Thank you again Ralph, think of a price, if you have Paypal it is easy to send you money.

I have also received a PM from Coryleif, he informed me about a Hong Kong company; kwokhing.com. These are the prices of the binders he purchased from them:

KHF2 (S thickness) 26mm USD 12.30

KHF8 Single Fold 1" USD 8.40

KHF66 1" USD 12.30. I have not had time to contact them yet.

Thanks

Trox

Hi Bro , Of course the feed dog and the guide are hooked up with a pin on the guide that fits into a hole on the hungry dog !

& those pieces have been kikin around with me for the last 30 yrs just waiting to find a good home and , alas , there U are ! I would say it's a miracle .

Aren't the feet just simple left handed feet ? Maybe the back foot has no foot on the side & i got dome of those too which I also don't use anymore . They are included in the price .

Send some pics of the feet . I'm sure I got some .

LEATHER GURU

Posted

You are the miracle Ralph, Thanks again. But don’t you still have a Pfaff 335 that can use those feet? I do not have any picture of those feet’s, but it is drawings of them in the subclass part list attached. If you look at the sub class -H3 17/01 and the above part numbers. It looks like a standard left foot with a short and wide vibrating presser (front) foot. I guess that is easier to see when the binder is in place and modify them then. (However, the Pfaff feet’s are very hard tempered, I had to grind a bit on mine, and it was very hard)

Thanks

Trox

kgi582aa.pdf

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

Posted

Here is a picture of a Consew 227 with a sync. raw edge binder that Coryleif sent me. I has a cut of presser foot and a short front foot.

Trox

post-10237-060805700 1328551262_thumb.jp

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

  • Members
Posted

You are the miracle Ralph, Thanks again. But don't you still have a Pfaff 335 that can use those feet? I do not have any picture of those feet's, but it is drawings of them in the subclass part list attached. If you look at the sub class -H3 17/01 and the above part numbers. It looks like a standard left foot with a short and wide vibrating presser (front) foot. I guess that is easier to see when the binder is in place and modify them then. (However, the Pfaff feet's are very hard tempered, I had to grind a bit on mine, and it was very hard)

Thanks

Trox

Hi Trox , I got X 2 335s & I dont use them too much anymore . If U wan't U can come here and I'll give U one ! She's got an EFKA with needle positining system !

Don't worry about me ! I'm glad to help .

RALPH

Posted

Thank you Ralph,

If you do not want any money, I sure own you a big favor. Maybe you will need anything I can help you with, or somthing from scandinavia. Do not hesitate to ask me. You are the best. Not only a great craftman, but a great human being too.

Please send me an email with your account number or Paypal details so I can pay you for the shipping at least.

Thanks

Trox

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

  • Members
Posted

Hi Trox,

okay, if you have any quetsion or you need help you can contact me!

Thanks!

best regards

sewingtec

Hi Sewingtec,

Thanks, but it looks like I will get some help from my friend Ralph (Leather Guru). I also have some options to buy from a low price Hong Kong company kwokhing.com, If I can get in contact with them. But thanks for your help, you are doing a great job on sew24.com providing manuals and obsolute parts.

Thanks

Trox

you can contact me send a mail to: info@sew24.com

Posted

Hi Sewingtec,

Thanks, I was lucky to get help from a friend. I think this solves my problem this time.

Thanks.

Trox

Hi Trox,

okay, if you have any quetsion or you need help you can contact me!

Thanks!

best regards

sewingtec

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...