Members longtooth Posted February 17, 2012 Members Report Posted February 17, 2012 Have the opportunity to purchase a Randall creaser. The problem is it's not assembled. I'm guaranteed that all the parts to put together are in the box. It's an old one about twelve inches long and creases numerous sizes of leather. My question is it difficult to put together. I'm pretty handy but looking at this in the box is a little intimidating. Quote
Members rawhide1 Posted February 17, 2012 Members Report Posted February 17, 2012 I wouldn't think it would be to hard. If the monies right it would dang sure be worth the try. If I remember right the one I used to use just had a shaft with the different width of creasers held on in place with splines and some springs for tension. Although this one had been converted to run off of a motor. I'm not sure if it was a randall or not. If ya pass on it give me a holler as I would give it a whirl if it was priced right. Best of luck, Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.