Ambassador pete Posted January 17, 2008 Ambassador Report Posted January 17, 2008 I sometimes had trouble centering my maker mark on some projects. What I did was to make a template out of cardboard and mark the centerlines. Now I know that it is "plumb" and where I want it. I place it on the piece and put the mark inside the hole. Quote
Members waddy Posted January 17, 2008 Members Report Posted January 17, 2008 Neat idea!! Thanks Quote
gtwister09 Posted January 17, 2008 Report Posted January 17, 2008 I sometimes had trouble centering my maker mark on some projects. What I did was to make a template out of cardboard and mark the centerlines. Now I know that it is "plumb" and where I want it. I place it on the piece and put the mark inside the hole. That would be plumb and level.... :D Regards, Ben Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.