FHL FERG Posted May 8, 2012 Report Posted May 8, 2012 (edited) I am looking for info on a Prosew Model M 120-2 cylinder arm machine. I need to know what it's capable of, foot type, lift, needle and thread sizes, etc... Several google searches turned up nada...... :/ Edited May 8, 2012 by FHL FERG Quote FTM-PTB
Moderator Wizcrafts Posted May 8, 2012 Moderator Report Posted May 8, 2012 (edited) That machine resembles a Cowboy CB2500 and Techsew GA5-1. If this machine has the same specs, it can sew up to 7/16 inch of leather, using needle sizes 23 through 26 (plus or minus a size). It can handle thread sizes 138 through 346. Like the aforementioned machines, it will be bottom feed only, with a flat fixed presser foot and has a large cylindrical bobbin. These machines are based on the ancient Singer 45k25. They are good machines for sewing just under a half inch, but where the tooth marks on the bottom are not normally seen, or considered unacceptable by the end buyers of the goods produced on the machine. Edited May 8, 2012 by Wizcrafts Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.