Members JustWakinUp Posted July 25, 2008 Members Report Posted July 25, 2008 Hey everyone, I've been using the craftool edge slicker by hand for a while now. I thought I would give it a go by attaching it to a drill. If you've done this method before, could you please shed some light on the best method of attaching it to a drill. Thanks in advance. Quote
Timd Posted July 25, 2008 Report Posted July 25, 2008 1/4-20 x 2" bolt, stuck through the hole and bolted. Quote
Contributing Member ClayB Posted July 25, 2008 Contributing Member Report Posted July 25, 2008 I did mine the same way with the bolt. Just be careful when you try to slick with it because the plastic slicker will melt if you use too much pressure. Quote
Members HandyAndy Posted July 27, 2008 Members Report Posted July 27, 2008 I bought a 50 cent mandrel from Harbor Freight. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.