Iwb With Clip Questions

[mlapaglia]

1345720355[/url]' post='261485']

I was trying to use a chicago screw, I guess rivets would work better. I will give it a try, thanks!

If you are good at them copper rivets hook great. But regular rivets are easier to set. Just make sure they are installed correctly.

[Go2Tex]

If you are good at them copper rivets hook great. But regular rivets are easier to set. Just make sure they are installed correctly.

Copper rivets are much stronger, but for this application, a bit of an overkill. The rivet is just to keep the clip from sliding out of the holder. Not much stress on it. But, I have all but quit using those jiffy rivets. They come off way too easy. Tubular rivets with caps are the way to go if both sides are visible. Otherwise, just pound them out flat on the back after using the setter to split them.

[mlapaglia]

Copper rivets are much stronger, but for this application, a bit of an overkill. The rivet is just to keep the clip from sliding out of the holder. Not much stress on it. But, I have all but quit using those jiffy rivets. They come off way too easy. Tubular rivets with caps are the way to go if both sides are visible. Otherwise, just pound them out flat on the back after using the setter to split them.

I agree about the over kill but in my opinion they just look better on a black holster.

[Go2Tex]

I agree about the over kill but in my opinion they just look better on a black holster.

Brass rivets look even better.

[IngleGunLeather]

Went ahead and used 4/5 oz HO for the cover on the final product. I also learned that I need to order a size 0 bissonette edger for the 4/5 oz. With the exception of a couple long stitches in the turns, I'm satisfied with the product.

Edited August 26, 2012 by CountryTrash

[D Fingers]

1345643721[/url]' post='261373']

I make my clip holder as thin as possible and still thick enough to not tear out. So, about 3-4oz. Comfort and reholstering is secondary and really, in the major scheme of things, not even much of a consideration to most average John Q's out there. But, if reholstering is important, Kydex IWB holsters are hard to beat and will likely put us leather guys out of the IWB holster business.

Go2Tex I respectfully disagree. Kydex is for military and law enforcement, in which the pistol is an every day tool and there is no hope of maintaining a decent condition for the pistol. Private owners usually want to maintain the highest possible condition of the finish of their pistols over the long term. This is the advantage leather has over kydex/injected plastic. 1 day in kydex is equal to 100 days in leather as far as wear to the finish of a gun, in my humble opinion and empirical experience. This of course is the point that we must make to our customers and the market generally as custom leather holster makers. This is all to say that I don't think leather IWB's are going anywhere.

Edited August 27, 2012 by D Fingers

[mlapaglia]

Leather will remain just has it always has. Want the best in a car seat? you get leather. Want a great and classic couch, people get leather. A jacket that speaks for it's self, leather again. Kydex will suit those that buy off the rack. Those that want something that meets their needs and wants will still go for leather. I can see it existing along side of leather for a while but it will never replace leather as the holster material of choice.

As for reholstering. I originally made my IWBs without a reenforcement piece to hold it open. My feeling that a regular person would not need to re-holster normally. Boy was I wrong. First time I wore mine out for the day I had to take it out of the holster 3 times. Once to adjust the holster and twice due to places that did not allow hand guns. I learned quickly that the ability to re-holster one handed was not just for tactical situations. From that point on all my IWB holsters have the ability to re-holster one handed.

That's my opinion anyway.

Edited August 27, 2012 by mlapaglia

[renegadelizard]

Went ahead and used 4/5 oz HO for the cover on the final product. I also learned that I need to order a size 0 bissonette edger for the 4/5 oz. With the exception of a couple long stitches in the turns, I'm satisfied with the product.

I think it looks pretty dang good...give the horse hide a try next time...12 bucks for the but...you can cut a lot of reinforcement pieces out of one and my customers like the idea of something different...added value without added cost...