Bodyguard Magazine Substitute

[SooperJake]

Will the LCP mag work in place of a Bodyguard Mag for molding?

Jake

Edited September 9, 2012 by SooperJake

[Shooter McGavin]

If they are both steel framed single stack 380 mags I would guess yes. There doesnt seem to be a lot of variation in sizes between magazines with the same build style and caliber.

If someone can confirm my guess that would be awesome though.

[SooperJake]

Yes, it would be awesome if they would.

Jake

[renegadelizard]

Yes, it would be awesome if they would.

Jake

Ive googled everywhere trying to come up with measurements for the bodyguard mag...no luck...

[03jesse41]

Ive googled everywhere trying to come up with measurements for the bodyguard mag...no luck...

My girlfriend has a bodyguard and I can get some measurements off of it on lunch if you still need the information.

[SooperJake]

Yes, Please. I want to make a holster and pouch for my Brother-in Law's birthday, so I don't want to ask him for the measurements. if the mags are way off, I need to order one with the blue gun.

Jake

My girlfriend has a bodyguard and I can get some measurements off of it on lunch if you still need the information.

Edited September 12, 2012 by SooperJake

[03jesse41]

Please forgive me I forgot to do this before my vacation. But here is the info.

Width- 1.077"

Thickness-0.437"

Height-3.089"(from bullet tip to bottoming out on top edge of finger rest on mag)

Hope this helps and isn't to late

[SooperJake]

Not too late and pretty near identical, although I'm eyeballing with a ruler vs. calipers. If I understand your length measure, the LCP is shorter, but I don't think that presents much worry.

Thanks 03!

Jake

Please forgive me I forgot to do this before my vacation. But here is the info.

Width- 1.077"

Thickness-0.437"

Height-3.089"(from bullet tip to bottoming out on top edge of finger rest on mag)

Hope this helps and isn't to late

[03jesse41]

You will be good to go then and no problem.