Members hairybiker Posted January 19, 2013 Members Report Posted January 19, 2013 Hi there Can anybody help, i am after a service manual for the singer 29k53. Does anybody know where i may be able to get a copy. Or does anybody have the manual that they want too sell. Many thanks Quote
Members mikesmith648 Posted January 19, 2013 Members Report Posted January 19, 2013 http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0CFAQFjAD&url=http%3A%2F%2Fwww.siruba.co.uk%2FSinger%252029K%2520Instructions.pdf&ei=_OL6UK_tBayr2AX-2YDQCA&usg=AFQjCNFFLvYB7jeB_jvpk1-rT0NmZodkyg&bvm=bv.41248874,d.b2I above is a link to the manual...HTH Quote Emergency Room Nurse by profession.......Leatherworker at heart!! Hoping to reverse the order in that one of these days!!
Members hairybiker Posted January 19, 2013 Author Members Report Posted January 19, 2013 thanks for your reply,i will have a look Quote
Members hairybiker Posted January 20, 2013 Author Members Report Posted January 20, 2013 thanks for the link mikesmith648 but i have that one,i was after a service manual that gives all the set up tensions and settings so that i can start at the beginning to see if i can sort out my top thread looping problem as this manual also has some troubleshooting ideas for a service engineer. Quote
Members BunnyMade Posted January 23, 2013 Members Report Posted January 23, 2013 http://parts.singerco.com/IPpartCharts/ <- For part numbers/images and they sometimes have good exploded views of machines. http://parts.singerco.com/IPinstManuals/ <- For the "User Manuals" (sometimes I've found the service manuals here too). http://parts.singerco.com/IPsvcManuals/ <- For the "Service Manuals" (found that these are much fewer, and some are user manuals). I always keep a little bucket of scraps near my 29k to keep testing tension until I'm happy with the results. A picture might help, I guess? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.