awharness Report post Posted February 7, 2013 I picked up this Juki, ironed out all the kinks, have it back sewing like a top! However, since I've always had a knock off short arm 441, I've never had a Bobbin winder built in! Mine isn't working, I pulled it apart, am I missing anything?? I looked at several manuals, no diagrams of this! Thanks! -Andrew I'll post the picture here shortly, apparently I can't upload a picture to here from m iPad! Since its the send time I wrote this post- first from my iPhone! But I never posted it because I couldn't upload the picture! Quote Share this post Link to post Share on other sites
dirtclod Report post Posted February 7, 2013 Sounds like you need a new tire on your winder. When you take the winder out there should be a tire that fits on a wheel that rides on another wheel that drives the winder. If you need a tire Bob Kovair can sell ya one. Quote Share this post Link to post Share on other sites
awharness Report post Posted February 7, 2013 Ok, Now that I am at my PC I can post a picture to this! Here is the picture, I think I am missing something! I know Bob at Toledo had the spring I was missing, and helped me out with that! Hopefully this is a quick fix, if not, i'm going to the table mounted style like have had on my Adler's and my short arm 441! Quote Share this post Link to post Share on other sites
bruce johnson Report post Posted February 7, 2013 Yep, you need a tire. It goes on the grooved pulley looking thing there. Quote Share this post Link to post Share on other sites
