Members triage1998 Posted February 12, 2013 Members Report Posted February 12, 2013 (edited) Anyone have a lead on some nice black Chicago screws. I have the Nickel ones from Weaver Leather and that is the quality I am looking for. To bad they do not offer black in that quality of screw. I have ordered from 2 different places (http://www.mcmaster....-screws/=lg4uni and http://www.chicagosc...g=us&category=3) and and was not at all impressed with the quality at all. Shallow screw slot depth and if you over tighten it really messes up the finish and strips the slot heads. After spending $40.00 total at both places I am left with junk. Edited February 12, 2013 by triage1998 Quote
Members Dwight Posted February 12, 2013 Members Report Posted February 12, 2013 Triage, check your PM, . . . I get mine from Tandy's and am about 95% happy with them. The 5% unhappy, is they don't come short enough for just a few things I do, . . . wind up having to put a spacer somewhere, . . . one size shorter than their shortest would be a great help. May God bless, Dwight Quote
Members Cameroo Posted February 12, 2013 Members Report Posted February 12, 2013 Tandy has them as short as 1/8". They have an open back so they can probably go even tighter than that. Quote
Members George B Posted February 13, 2013 Members Report Posted February 13, 2013 I have been using the Tandy in 1/8" and 1/4" they work well. The only things I don't like are the dome head screws would rather have flat. And that they cost more. Other than that they have a good finish and I've never had one strip out. Quote
Members Geowing Posted February 14, 2013 Members Report Posted February 14, 2013 try this site lots of different sizes and types! http://eleathersupply.com/fasteners.shtml Quote
Members Geowing Posted February 14, 2013 Members Report Posted February 14, 2013 or this one lol http://springfieldleather.com/27694/Screw-Post%2CBlk%2C1-8%22%2C100pk/ Quote
Members triage1998 Posted March 7, 2013 Author Members Report Posted March 7, 2013 Thank you Dwight for sending me some 1/4" in black from Tandy. Those are really nice. I am going to order some but I also need the 3/8" Chicago screw and nobody seems to carry them in black. Anyone? Quote
Members Hornbag73 Posted March 18, 2013 Members Report Posted March 18, 2013 http://usaknifemaker.com/sheath-making-materials-supplies-c-37.html Try some of the knife making websites they use them for kydex sheaths. Maybe they have what you are looking for. Quote
Members Itch Posted March 18, 2013 Members Report Posted March 18, 2013 Watch what you buy the aluminum ones as they are junk..Years ago while looking I thought that these would work..They strip out very easily..Good luck. Quote
Members Grimsin Posted April 13, 2013 Members Report Posted April 13, 2013 Watch what you buy the aluminum ones as they are junk..Years ago while looking I thought that these would work..They strip out very easily..Good luck. Yea, the Aluminum screws are terrible. Quote
Members tnawrot2 Posted April 13, 2013 Members Report Posted April 13, 2013 This place has the size you are looking for. http://www.wwlhardware.com/wwl/Rivets.jsp Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.