Members srtboise Posted March 15, 2013 Members Report Posted March 15, 2013 hi all, here is my first attempt at leatherworking, finished it about a week before xmas 2012: i did quite a few things 'wrong'. i punched the holes before folding it together thinking it would line up while i was stitching it together. needless to say, stitching was quite the ordeal...the biggest mistake was not treating the leather with some kind of conditioner before applying a final finish and the leather started cracking about a week after the finish dried... overall, i am happy with it as a first project. it was a great learning experience. steve Quote
Members Bigfoot Posted March 17, 2013 Members Report Posted March 17, 2013 Looks great to me. What finish were you using? Some finishes are too hard to use on leather that flexes and it will crack. Quote
Members srtboise Posted March 17, 2013 Author Members Report Posted March 17, 2013 Thanks Bigfoot, I am happy with it as a first attempt. The finish is Eco-Flo Satin Shene at the advice of the guy at my local Tandy store. steve Quote
Members sepharad Posted April 28, 2013 Members Report Posted April 28, 2013 Nice work. You can line up in advance by using registration marks and then counting and making stitches that parallel. What would you have done to precondition before working the leather if you had it to do over again? I have had cracking with tooling/veg leather as well. Quote
Members srtboise Posted April 28, 2013 Author Members Report Posted April 28, 2013 I'm actually almost done stitching another quiver. Will apply some neatsfoot oil before final finish. steve Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.