Jump to content

Recommended Posts

  • Members
Posted

I did a little bit of research on the topic of presses for the leather tip. I ran across was couple references, but mostly it was from places that sold a press and not about the "hows and whys."

The only other thing I found was information on different styles of tip shapers. I think that had to do with the large number of tips that come without any preformed shape. I also found out that there is some form of hardness measurement used to classify the tip for whatever purpose you desire. Not sure if it's a standard durometer or some other measurement type, though.

Here are two of the different presses that I found. Both of these are from the same place, but that type one seems to have an unreasonably high price tag on it. They sell it though the site for about $75, but it looks like a bunch of common stainless steel parts from a hardware store with a bit of rework done.

post-32478-0-98187700-1368817155_thumb.j

post-32478-0-99559500-1368817166_thumb.j

If I ever get a chance to make one of these up, at least I'll know who to send it to for testing... ;)

  • Members
Posted

Trust me, the tip presses are nice, but not needed. Just pressing in a vise will be plenty

Chuck

  • Members
Posted

Trust me, the tip presses are nice, but not needed. Just pressing in a vise will be plenty

Chuck

Would it be safe to assume the best way would be to press small sections of leather, whilst wet?

  • Members
Posted

Would it be safe to assume the best way would be to press small sections of leather, whilst wet?

Yes. Depending on your tip size, 11mm 12 mm etc, cut the blanks roughly the same mm or slightly bigger in diameter. It will spread to a larger diameter when pressed, so no need to go nuts wih worry about sizing a this point. Different people swear by different things to soak tips in. Water, milk and whiskey are some of the more popular options. The casian in milk can have a binding effect on the leather fibers to a small degree. Either way, vise it until its dry. Preferably between wood, or smooth jaws on the vise.

Here's a thread I did for a different forum about installing tips by hand. You can get by with only a razor blade, but if you play a lot, you can invest in he tools mentioned.

http://forums.azbilliards.com/showthread.php?t=51018

If using a razor blade to trim the tip, go slow and pretty much just shave the leather off. Don't try to chop it off.

  • Members
Posted

Thanks for that - The tutorial is certainly very detailed.

I've been retipping using only a Stanley knife (box cutter) with a new or recently changed blade, super glue and a couple of fine papers.

I think some people think it's some kind of voodoo magic retipping a cue, but really it's about not rushing things.

  • Members
Posted

Ok, using a vice, I rough-cut four pieces of 6mm leather, soaked in water for a couple of minutes, and left in the vice overnight.

What i'm left with are four discs of pretty dense-looking leather - Much closer to what i'd describe as cue tip material.

Thing is... I don't have any more cues to re-tip :bawling:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...