Members kevturbo Posted July 2, 2013 Members Report Posted July 2, 2013 Hi all, I need to use a strap end cutter for about 30 belts at a time, and I was wondering if there is a faster way anyone could recommend than using a poly/rawhide mallet and doing them by hand. I considered using an arbor press but the strap end cutters I have are too wide at the top - about 3/4" - to be able to drill in to the arm, or too long - about 5 1/2 " - to fit under the press arm. I think I am missing a trick here somehow, and would appreciate some advice. Fitting each strap into a jig, and pressing them would be both fast and accurate too - at least that was the train of thought I was having on the subject. Any advice from you seasoned strap cutters out there in Leatherworker land, as I am stumped on this one! Thanks a million in advance. Kevin Nickelsafe, UK Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.