dickf Report post Posted July 4, 2013 Hi all, Looking for this mold - anyone seen one around? It doesn't appear to be an item Rings sells. Quote Share this post Link to post Share on other sites
workingmanleather Report post Posted July 4, 2013 Not sure which one this is but its from cheaper than dirt looks like the cm9/40 but the pm9/40 are so similar looking Quote Share this post Link to post Share on other sites
chiefjason Report post Posted July 4, 2013 My wife carries one, so that's what I use. Dimensionally, the frame of the Kahr CW, P, K and T series 9mm and .40's are the same. The length of the barrel changes. Kind of like 1911's. Not sure that's much help though, since the PM is a shorter barrel and that's the only blue gun. The .45 is noticeably thicker in the frame, so that's not good either. Quote Share this post Link to post Share on other sites
PappyUSA Report post Posted July 4, 2013 The 40s are a little thicker than the 9s but not much. Quote Share this post Link to post Share on other sites
dickf Report post Posted July 4, 2013 Well, I've got an order for holsters to accommodate the 9/40 and the 45. I can score the 45 but at this point, I don't think they make the 9/40 version. Ugh....thanks for the help, fellas. Quote Share this post Link to post Share on other sites
PappyUSA Report post Posted July 4, 2013 If you can get the 9 then you can do 40s also. The 40 will squeez into the 9 but the 9 is too loose in a holster made for a 40. Quote Share this post Link to post Share on other sites
