Members sjstates Posted July 30, 2013 Members Report Posted July 30, 2013 When I was applying some RTC over my antique it picked up and smeared some of the antique where I don't want it. Is there a easy fix for this? Quote
Members Cyberthrasher Posted July 30, 2013 Members Report Posted July 30, 2013 Sometimes you can fix it if you clean it up immediately....... Whenever you apply finish over your antique, use light pressure and make sure you're not using an applicator that will go down into the tooling to pull the antique out. Also, make sure you're letting your antique dry long enough. Give it some time to cure and harden up a little bit so it doesn't pull out as easily. Quote hellhoundkustoms.wordpress.com www.facebook.com/hellhoundkustoms www.etsy.com/shop/HellhoundKustoms
electrathon Posted July 30, 2013 Report Posted July 30, 2013 Try using tan kote over the antique and RTC under the antique. Aaron Quote
Members sjstates Posted July 30, 2013 Author Members Report Posted July 30, 2013 Thanks guys I appreciate the help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.