Jump to content

Recommended Posts

Posted

When I was a boy there was allot of two stoke motorcycles, one had a German 125 cc Sachs motor. These 441 clones remind me of the sound of one. (my own included).

:rofl:

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

  • Members
Posted

Chucka-chucka-chucka! :^)

  • Members
Posted

First off, THANKS for all the help over the last few days, much appreciated. When it was all said and done the problem may have been as simple as changing the position of the Thread stand/guide. I went back and viewed the Al Bane Cobra 4 video again. I noticed that the position of the stand was directly behind the machine head with the thread guide directly above the spools. Mine wasn't even close to that. I repositioned both to match the video. I went back to working on the cross draw Cowboy rig and completed it, including the belt, with no dropped stitches. It finally seems that the light is very bright at the end of the tunnel, I am keeping my fingers crossed. :cowboy: Below is a picture of the finished rig. Once again. Thanks ! ! !

post-41722-0-42484600-1376069346_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...