Jump to content
Lacosta

Scallop Edge On Suede

Recommended Posts

Hi Everyone,

I am looking for a suede or leather trim that has tiny scallops on one edge with a tiny stud in each scallop.

The other end would be wide enough to sew. I see this trim on tons of purses and cannot find where to

aquire it. Last resort is to make it - where to purchase a GOOD scallop leather sissors?

Anyone run across this or is using it?

Thanks a Ton :thumbsup:

Share this post


Link to post
Share on other sites

Hello Lacosta,

I haven't seen a premade trim like this. Have you tried searching Etsy for someone selling this in one of their shops? There are a lot of people there that sell raw material for making other crafts, and maybe someone there has something that will work for you.

I've tried a few of the scalloped scissors made for paper crafts and so far I haven't found any that work really well for cutting paper consistently, let alone leather. If I were going to make a scalloped trim I would cut the suede to the size I needed then I would use a half round punch to punch out the individual scallops.

Bob

Share this post


Link to post
Share on other sites

I make my own by using strips of the appropriate sized leather (I make it a bit wider than needed and after scalloping I trim to the correct width) and for the scallops there are no scissors available that I know of so I use a round punch of the appropriate diameter and grind off half of one side to make it a half round. This is a pic of one of my pairs of botas on which I used fairly large scallops, but I have made them as small as 1/4" with a 1/8" spot in the center

Botas_005-2.jpg

Share this post


Link to post
Share on other sites

or you can get a pinking punch like these http://brucejohnsonleather.com/content/index.php/leather_tools_for_sale/leather-punches-concho-slot-strap-end-and-hole-punches/

On softer leathers it also helps to tape the back side with blue tape -it helps keep the leather from loosing it's shape

Share this post


Link to post
Share on other sites

Thanks Chuck & Bob for your input. Some tool maker should design a punch in different sizes with several in a row

as well as a single. Probably sell a ton.

Thanks again :cowboy:

Share this post


Link to post
Share on other sites

Ask and you shall recieve - Bruce Johnson leather has 1/2 round punches!

Thanks Bruce :cowboy:

Share this post


Link to post
Share on other sites

I remember finding this feed a while back and I've finally figured out how to get lots of different scallops. I made a video about this here hoping it will help someone who finds this later. 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...