SooperJake Report post Posted October 1, 2013 Have any of you molded an SR40 Ruger holster using an SR40c dummy? The difference is a little over 1/2" in length. How did it work out if you did? Quote Share this post Link to post Share on other sites
juanfartez Report post Posted October 1, 2013 if it is an open toe and no top strap it will work fine. giving you gave the extra 1/2 inch into the toe. Quote Share this post Link to post Share on other sites
George B Report post Posted October 2, 2013 The only obstacle I see would be the rail at the bottom. It is fairly pronounced and if molding you would need to extend the forming of the rail. I have made for the sr40c using the full size, by forming the bottom after forming the upper area of the pistol. If it is not going to be tightly formed you could probably get away with it. Quote Share this post Link to post Share on other sites
SooperJake Report post Posted October 4, 2013 Thanks guys. Quote Share this post Link to post Share on other sites
