Members rscow Posted October 31, 2013 Members Report Posted October 31, 2013 I'm looking at trying my hand at a camp stool or two. After seeing some of the beautiful ones on this board. I found a source of brass rings. If I'm using 1 inch hardwood dowels, for legs...what size ring would be best? Here is the source (found link here on the board, of course): http://www.reefscuba.com/brass_rings.htm Quote
Members RoyalLeatherDesigns Posted October 31, 2013 Members Report Posted October 31, 2013 I really would know exactly what you need but if there are 3 of them in there i would check to see if a 3 inch one fits I seen one made here with a 3 inch diameter ring so I think that would work. His was made with a stainless steel ring but I think brass is much nicer when wood is varnished. Good luck! Ralph Garcia Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.