humperdingle Report post Posted December 5, 2013 Hi folks, might be a daft question here... I've been making some small possibles pouches with approx 5mm thick veg tan. I want to fit a sam brown, but the screw part of the fitting won't reach through the leather to engage with the stud part. What's the best way around this? Can I buy longer screw parts? Do I just try to skive some material from under the screw part? Or is there a nice, neat, quick way? Quote Share this post Link to post Share on other sites
Geneva Report post Posted December 5, 2013 Find a trusty ball peen hammer (8oz) and your mallet place the hammer peen end on your hole for the screw. Strike firmly. Install screw. Quote Share this post Link to post Share on other sites
humperdingle Report post Posted December 5, 2013 Find a trusty ball peen hammer (8oz) and your mallet place the hammer peen end on your hole for the screw. Strike firmly. Install screw. To create an indent? Quote Share this post Link to post Share on other sites
Geneva Report post Posted December 5, 2013 Yes, create dent. Quote Share this post Link to post Share on other sites
