Need Steel Belt Holster Clipfor 1 3/4 Wide Belt

[mlapaglia]

I just finished a belt for a customer that is 1-3/4" wide and 1/4" thick. None of my spring steel holster clips will fit the belt. Even the one that says its internal opening is 1.8" is just short of clipping. Any suggestions on where I can get a belt clip that rivets on and has a 2" internal opening and is at least 5/16" wide at the internal top of the clip? No J clip suggestions please. The customer wants steel clip like he is used to.

This is what I'd like. The ones I have are 3/8" I need 5/16" at the top of the opening and needs to be 2" internal length.

This might work if I could find it and not have to buy 1000.

l

Thanks

Michae

Edited January 12, 2014 by mlapaglia

[camano ridge]

Check these out. They have 2 1/4" inside length. Not sure of the opening width. http://www.albest.com/product.asp?Func=DispProd&SelCat=Holster+Clips&Page=1

[mlapaglia]

Check these out. They have 2 1/4" inside length. Not sure of the opening width. http://www.albest.co...er Clips&Page=1

Thanks but they look like the 3/8" opening width at top.