Jump to content

Recommended Posts

  • Members
Posted

I was looking on the Groz-becket website and they have a d and DH point needle, I use or now, but I really like the look of the D or DH. Does anyone have experience with these points with the 441's? Does anyone sell the Groz-becket in 794 d-DH in size 25 or so?

Thanks! -Andrew

  • Moderator
Posted

I have and use some diamond point needles on my Cowboy CB4500. They produce a very straight stitch line, with the thread sitting on top of the leather. The effect is the opposite of the more common S (wedge) point needles supplied with these machines. The S needles tend to lay the thread into the top layer, with a smaller visual gap between stitches. I find that some top tension increase is usually needed to bring the bottom knots up into the leather with diamond points, after using S points.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...