sheath knife

[trastu]

I wanted to make a nice sheath knife for this, what kind of pods he would? Does anyone have any pattern you can share? a greeting

[Rayban]

I believe you have have to build the sheath around this knife for proper fit...kinda like I'm doing for this one. I'll post pictures of the finished piece in a day or so....

[Sharpshooter]

This may get you going in the right direction..

It's not exactly the sheath you need to make but putting the retaining snap on the spine side of the knife attached to the front plate often simplifies sheathing those "strange" blades.

Here's another twist on the same concept.

The trick is to build a locking block on the backside of the faceplate. When the snap is fastened the knife is locked in place, when it's open the block is out of the way.

.jpg

[trastu]

thank you very much for the two. I will be very useful information. greetings from asturias

[russinchico]

I believe you have have to build the sheath around this knife for proper fit...kinda like I'm doing for this one. I'll post pictures of the finished piece in a day or so....

Hey rayban, howed you do the studs around the bolts on your knife?

[Rayban]

Hey rayban, howed you do the studs around the bolts on your knife?

I can't take credit for making the knife, only the sheath..to be finished very soon.

[trastu]

thank everyone for the support. I have already finished the sheath knife http://leatherworker.net/forum/index.php?showtopic=5601 I accept all kinds of critic. a greeting