Members KeithRobicheux Posted March 12, 2014 Members Report Posted March 12, 2014 I have a 2-1/4 # axe that I am sprucing up, and I wanted some expert advice on my sheath. This is the sheath I've bought: http://www.amazon.com/Nupla-22213-Rawhide-Campers-Utility/dp/B004UMH18S/ref=sr_1_1?ie=UTF8&qid=1394648504&sr=8-1&keywords=nupla+22213 It's pretty stiff and undyed. I was gonna treat it with mink oil. One of the Amazon reviews had a guy who soaked it in warm water and then pressed it between stuff, so that the leather conformed to the axe. I would like to do something like that. Does anyone have any thoughts? Can you soak leather in water, press it into form, then apply mink oil? I'm open to suggestions if y'all know how I can do it better. Thanks Quote
Tree Reaper Posted March 12, 2014 Report Posted March 12, 2014 You can soak it completely in warm water for twenty seconds and then press it with the axe in it between two pieces of foam. Let it stay that way for three hours, take it out and let it dry and then treat it with neatsfoot oil. Quote
Members KeithRobicheux Posted March 12, 2014 Author Members Report Posted March 12, 2014 Thanks. Sounds easy enough. Do you have a reason for liking neatsfoot over mink? Quote
Tree Reaper Posted March 12, 2014 Report Posted March 12, 2014 Better penetration with the oil. You can put mink on after the neatsfoot dries a couple of days, sno-seal would be better for an axe sheath. Quote
Members KeithRobicheux Posted March 13, 2014 Author Members Report Posted March 13, 2014 Should I just do the whole thing in sno seal, or the combo neatsfoot and sno seal? It's gonna be a camping axe, so having the leather protected would definitely be a plus. Quote
Members Dumfist Posted March 13, 2014 Members Report Posted March 13, 2014 Should I just do the whole thing in sno seal, or the combo neatsfoot and sno seal? It's gonna be a camping axe, so having the leather protected would definitely be a plus. If you want it to be softer, you should oil it beforehand so the leather can regain some suppleness. The sno-seal will act as a topcoat (maybe it even has oils to help it work into the leather) that protects against moisture entering the top surface. It's not meant to soften the leather, just to help weatherproof it. Quote
Tree Reaper Posted March 13, 2014 Report Posted March 13, 2014 The neatsfoot will help rejuvenate the properties lost when soaking, the sno will protect it from moisture. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.