Members Bluesman Posted March 22, 2014 Members Report Posted March 22, 2014 I got my new Cobra and am getting familiar with it. Today i wound a bobbin and wanted to increase the wind speed. So I watched the video, both the one that came with it and another on the Cobra site. Seemed simple enough. So i pressed and held the down button and it said 5.0. Then I pressed the down button again and it said 12. I hit the up arrow until I got 24 and the speed was much faster and I wound the bobbin. Now I want to go back to were I was which was 5.0 and 12. Well now I can't get back. When I hold down the down arrow I get 5.0 but hitting the up arrow it goes 5.1, 5.2 5.3 and so on. Then I also get L0, L1, L2. So what is all of this stuff, A manual would have really been nice. The videos brush over this area real quick. So can somebody tell me this. 1.) What is the 5.0, 5.1, 5.2 setting 2.) What is 6 - 24 3.) What is L0, L1, L2 And how do I get to them and what do they all do for me. This is way more confusing than it needs to be. Thanks Jon Quote If it ain't moving and should......WD40, If it's moving and shouldn't....Duct Tape. There you have it, now fix something
Members Bluesman Posted March 22, 2014 Author Members Report Posted March 22, 2014 Got it. Works now Quote If it ain't moving and should......WD40, If it's moving and shouldn't....Duct Tape. There you have it, now fix something
Members mexiconnect2013 Posted May 14, 2015 Members Report Posted May 14, 2015 How did you figure it out? 1.) What is the 5.0, 5.1, 5.2 setting 2.) What is 6 - 24 3.) What is L0, L1, L2 Quote
Members Joon1911 Posted May 14, 2015 Members Report Posted May 14, 2015 Umm. Mine came with a manual in the box with sewing head. If yours didn't then call Steve and I'm sure he'll send you one. It has directions in the back. If I have a chance I'll scan the page withe those directions. Quote "Make every product better than its ever been done before. Make the parts you cannot see as well as the parts you can see. Use only the best materials, even for the most everyday items. Give the same attention to the smallest detail as you do to the largest. Design every item you make to last forever." -Shaker Philosophy of Furniture Making
Members Joon1911 Posted May 17, 2015 Members Report Posted May 17, 2015 My how feeble my memory is these days. Finally remembered to scan the page from the Cobra C4 manual with instructions for the servo motor. Hope this helps. servo motor.pdfFetching info... Quote "Make every product better than its ever been done before. Make the parts you cannot see as well as the parts you can see. Use only the best materials, even for the most everyday items. Give the same attention to the smallest detail as you do to the largest. Design every item you make to last forever." -Shaker Philosophy of Furniture Making
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.