Members awharnessshop Posted March 28, 2014 Members Report Posted March 28, 2014 When I have my 441 in reverse the lever falls down, and it will "hop" with each stitch. How do I tighten it up? I haven't even really tried to resolve this issue yet! -Andrew Quote
dirtclod Posted March 28, 2014 Report Posted March 28, 2014 Take the plate off the back on the left hand side looking at the machine from the back. Turn the hand wheel till you see a screw, tighten it up just a little, the screw is hard to turn. That's what Ferdco told me several years ago and it has worked fine sense then. Quote I'm old enough to know that i don't know everything.
Members awharnessshop Posted March 29, 2014 Author Members Report Posted March 29, 2014 That solved the problem! Thanks!, I tighted it too tight at first and could barely move the lever, easy fix, thanks again Quote
dirtclod Posted March 30, 2014 Report Posted March 30, 2014 Your welcome ! Glad i was able to help. Quote I'm old enough to know that i don't know everything.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.