Members Magjua Posted April 9, 2014 Members Report Posted April 9, 2014 Hello! I bought a 10oz double shoulder for belts and it is quite stiff. I have finished it in three ways: some Vinageroon (with Neatsfoot after), some Mink Oil and some Neatsfoot Oil. They are all still stiff, a couple hung to dry over a beam and when I laid them flat they have wrinkles where the bend was. I keep oiling and it is getting a little softer. Is it possible to oil too much and ruin them or should I soak them in oil? Thanks! Quote
Members WyomingSlick Posted April 9, 2014 Members Report Posted April 9, 2014 Are you hanging them with the grain side down, that is on the inside of the curve. That is an important thing to remember with leather, particularly when storing it. Keep the grain side on the inside ad the flesh side out. Quote (John 8:32) And ye shall know the truth, and the truth shall make you free. (KJV) And the truth is that religion is nothing more than the lame attempt by largely ignorant people to bring sense and order to a world that was beyond their comprehension. Once you see religion for the delusional and superstitious artifact it is............... you will be free !
Members Magjua Posted April 9, 2014 Author Members Report Posted April 9, 2014 I did, over a 1 inch pipe, they were soaked though as they went through the Vinegaroon and then the soda bath. I think they just stretched a bit, then when I laid them flat it lumped up some. I will just dry flat from now on. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.