Sweaty Friends Biker Cuffs

[Wild Bill46]

Sweat cuffs for my Biker friend.

I just wanted to THANK my friends on LWN for their help with my concerns for this project.

I have completed what I hope will be a good solution for him. and that it will be a positive influince on his wrists.

I first made a 3-4oz veg tan lining strap the size of his wrist, Then using terry cloth I sewed a sleve to go over that strap.

Next I made the outer strap from Latigo, just long enough to go over the inner, but still tight enough for support.

And, using Velcro I was able to hold it all together at various points, so the inner strap will be removable in order to remove the sleeve for washing when needed.

I used Gum Tragacanth to smooth it down on the inside, slicked it down. (minus the terry (haha)

I put a few holes on top for some air circulation then,

I laced the edges and gave it all a coat or two or three of Ossie. Inside and Out !

I don't have pictures yet, but, when I can figure out how to reduce the size of most my pictures. I'll post them here.

Thanks my friends for your valuable input, your time, and your interest. _______ Wild Bill46