Members rmr Posted May 31, 2014 Members Report Posted May 31, 2014 making this case, and would like to use my cobra machine to sew on end panels. there is about a 3/4 "overhang edge- see picture- not sure what you call it- I don't think its a gusset. with the standard plate on my cobra machine I cannot make the curve in the 2 corners to sew. Is this where I should use the stirrup attachment?? If so- there were several threads I saw a while back( can't find them - so sorry for asking again) that had multiple different recommendations about tighten tension on the needle thread tension, others I thought said you had to do something with the bobbin thread tension- so what is it. If I attache the stirupp plate and sew on some scrap leather, the bottom side of the stitches look loose?? I have attached some photos Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.