Members BROD239 Posted August 9, 2014 Members Report Posted August 9, 2014 (edited) Please could you tell me how about thick has be this leather washer...OR how set this functin, of the topic tension disc, when the feeding foot is down and the needle bar is going up.Is some correlation to shuttle position? /and excuse me my english/ Edited August 9, 2014 by BROD239 Quote
Members Constabulary Posted August 9, 2014 Members Report Posted August 9, 2014 The leather washer I had on my 29K71 was about 1mm or 1.5mm but after I have finished my restoration I have not put it back on. I have attached instructions for 29K manual I hope this will help you to adjust your machine. Singer 29K Instructions.pdf Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members BROD239 Posted August 10, 2014 Author Members Report Posted August 10, 2014 I thank you for your info. Is some other variation in spare parts betwen 29k62 and 29k71 than in (needle plate screw / needle plate hing pin). And can I fix the needle plate 82234 for 29k71 with the screw 84w at my 29k62? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.