Jump to content
buckwhip

Bullwhips!

Recommended Posts

Howdy folks - new to the forum. Showing of my deerskin bullwhips, along with a couple of cowhide bullwhips.

First up is a white deerskin I just rolled out today. Still needs knots and some minor finishing work, but 90% of the tough stuff is complete. I made this bullwhip with nothing but left overs from previous builds.

Here's a pic of the 2nd belly, which was made with black, tan, and gold deerskin scrap strands I had lying around:

cornycore_zps083a0a7b.jpg

Here's the finished thong, without knots, at an exact 8':

IMG_20141025_202749_zpsf65e6222.jpg

Here's a detail shot of the tapering of the strands:

IMG_20141025_202839_zpsa86b31d2.jpg

Strands are 5.5mm at the handle, and taper down to 3mm at the fall.

Here are some random shots of other deerskin bullwhips, either finished or mid-build:

IMG_20140903_010513_zps24bce6dc.jpg

ebaytandeerskincoil_zpsf8e8e653.jpg

IMG_20140914_222015_zps1c438949.jpg

Share this post


Link to post
Share on other sites

They look great! What do you use as a core?

Share this post


Link to post
Share on other sites

They look great! What do you use as a core?

I shot-load my nylon bullwhip cores, but with my leather bullwhips, I usually use 4 - 6 tapered leather strands of different lengths and bolster them with some cowhide. Then I bind the core strands and bolster to my handle core, which is usually a 10" chrome steel spike, then bolster the handle and core and bind it all. I grease the strands sufficiently before the first bolster so that, while binding, the grease squeezes out and acts as a lubricant for the plaiting of the first belly.

Here's a video I did of a core I used for a deerskin bullwhip. I bind them differently now than the method I used in the video, but it is essentially the same concept.

Share this post


Link to post
Share on other sites

Thank you for the explaination. I hope to have a go at this sometime.

Share this post


Link to post
Share on other sites

How long does it take you to make one of these? They're very impressive, nicely done.

Stu

Share this post


Link to post
Share on other sites

Thanks Stu. Generally, an 8-10 foot leather bullwhip will take me between 30 and 40 hours. That includes stranding the hide, building the core, bolstering and plaiting bellies, plaiting the overlay, rolling, and knot work. It's easy work once you learn the basics, just tedious.

Here's a video of the unfinished whip I posted a picture of above, complete with knots and all the jazzy.

8' White Deerskin Bullwhip:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...