Members biker55 Posted October 30, 2014 Members Report Posted October 30, 2014 hello all, what type of punch do you use for lacing work? thanks Quote
Chief31794 Posted October 31, 2014 Report Posted October 31, 2014 I use punches from the mini punch set, you can get them from Tandy or Springfield or several other places. For 3/32" I use the 00 size and the 0 size on the corners, for 1/8" lacing I use the 0 size and the 1 size on the corners. On the corners I punch the corner hole and the one on each side of it 1 size larger to facilitate working around the corners. I hope that's what you were looking for. By the way I put the holes (center) 1/8" from the end on 3/32 and 3/16" from the edge on 1/8" Chief Quote "Life's too short to carry ugly leather"
Members biker55 Posted October 31, 2014 Author Members Report Posted October 31, 2014 thanks Chief for responding. will give it a shot. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.