Bicicouture Report post Posted November 30, 2014 Hi there! I am needing to bevel the edges of some 3/4 oz. Hermann Oak veg tan leather. I have a #2 edge beveler from Tandy that I have always used on 8/9 oz. leather but of course it doesn't work on the 3/4oz. I am looking into buying an edger or edge beveler and I was wondering what the best size would be to get. I have been looking at the Barry King Common Edger Size: 0. Would that be the correct size for the weight I am working with? Also, is there a difference between an edge beveler and an edger? I see that only edgers come in sizes below 2. Hope everyone had a great Thanksgiving! Quote Share this post Link to post Share on other sites
Red Cent Report post Posted November 30, 2014 I'm trying to picture using a beveler on 3/4 ounce leather. Would seem to work, maybe, if you glued it down. Or the beveler was razor sharp.I bevel 3/4 ounce but it is glued to 8/9 ounce. May I ask what are you making and the need to bevel? Quote Share this post Link to post Share on other sites
ninety5percent Report post Posted December 1, 2014 You can use the Tandy #2 edge beveler for that weight of leather. I think it's the most common used and that's the reason Tandy only sales that one. Here is a pic from the Al Stohlman leather craft tool book. Quote Share this post Link to post Share on other sites
