Jump to content

Recommended Posts

Made holster and used Eco-flo professional water stain. Wat type finish can be applied over this. I had project by my sink as I was washing my hands and little water droplets got on dyed leather left small dark spots so apprehensive about trying something without darkening.

Share this post


Link to post
Share on other sites

Welcome to LW.net --- To answer your question, I believe just about any normal top coat will work with this product, Super sheen, leather balm with atom wax, etc...

For more info you can read this thread... http://leatherworker.net/forum/index.php?showtopic=34586

Share this post


Link to post
Share on other sites

You can use just about any of the finishes out there as a top sealer. Being as you used the Eco-Flo water based stain you should probably use the Eco-Flo Super Sheen as it is formulated to better work with that product. If you use the Leather Balm with Atom Wax you will see a darkening of the leather so, being as you have indicated that you have now gotten water spots on the finished product and they are darker than the remaining area, you may want to consider this as the "go to" product. You may also want to consider giving the overall piece a coating of Pure Neetsfoot Oil first and allow it to set in overnight. It will darken the leather as well and could help balance out the spots with the rest of the finish.

However, keep in mind that no matter what top finish you use this item will naturally darken over time. Also, you need to be aware of the fact that being as you have used water based stain there is a risk of rub-off and any moisture that the finished product is exposed to could cause the coloring to run or bleed. This holds true for any water based product and that is why when you want a lasting finish you need to use the chemical based dyes and stains.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...